$ filename:     .\EDS\82.Vnd\2.Typ\500.Cod\A500\A500.EDS
$
$               FR-A500 & FR-A5ND Electronic Data Sheet
$               For A520, A540 & A560
$
$
$ Same as Doc#: C2CD-A00011-006
$                     
$ Description:  EDS for FR-A5ND DeviceNet option card for A500 VFD
$ Created By:   SDC
$ Modification  History
$   SdC         970910   Revised parameter names, min and max, defaults, etc. for various
$                        parameters
$   LJW         970917   re-map all pr's 
$   LJW         980112   Changes for Conformance Test ver 2.0 - 1.02 
$   SD          980114   Requested Changes   
$   LJW         980422   More Requested Changes
$   LJW         990203   Adapted to A560
$   LJW         990222   Adapted to A500L
$   LJW         990224   Adapted to A520
$   LJW         990427   Adapted to RSNetWorx
$   agb         990428   Adapted to RSNetWorx (full version)
$   agb         990429   correct misspelled "Japanese"; also correct rev no.s
$   ljw         990601   adapted to EDS Checker
$   ljw         990614   more requested changes
$   ljw         000404   complete new revision 4.5 
$   ljw         000518   rev. 4.7, adapted to EDS Checker 2.02 


[File]
    DescText    = "EDS for A500";
    CreateDate  = 09-10-1997;
    CreateTime  = 10:04:00;
    ModDate     = 05-18-2000;                        
    Revision    = 4.7;                                 $minor must be odd #


[Device]
	VendCode    = 82;                                  $ Vendor Code
	ProdType    = 2;                                   $ Product Type
	ProdCode    = 500;                                 $ Product Code

	MajRev      = 1;	                               $ This MUST Match firmware of A5-ND, attr 4    
	MinRev      = 1;                                   $ Minor Rev (no need to match value in dev)
$
	VendName    = "MEAU";
	ProdTypeStr = "AC Drive";
	ProdName    = "A500";		                       $ This MUST Match firmware of A5-ND, attr 7
	Catalog     = "FR-A5ND";


[IO_Info]
	Default     = 0X0001;                              $ 
	PollInfo    = 0X0001, 1, 1;                        $ 

$$ 1st input
	Input1 = 4,					                       $ 4 bytes
	  	0,					                           $ All bit are significant
	  	0x0001,				                           $ polled
	  	"Status",				                       $ Name
	  	6,					                           $ path size
	  	"20 29 24 01 30 28",	                       $ assy obj inst 71 attr 3
	  	" ";					                       $ help

	Output1= 4,					                       $ 4 bytes
		0,					                           $ All bit are significant
		0x0001,				                           $ polled
		"Status",				                       $ Name
		6,				                     	       $ path size
		"20 29 24 01 30 29",	                       $ assy obj inst 21 attr 3
		" ";				                           $ help


[ParamClass]
    MaxInst     = 370;                                 $ Number of params described in this file
    Descriptor  = 0x09;                                $ 
    CfgAssembly = 0;                                   $ We don't support a configuration assembly


[Params]
$class 0x28  motor data
	Param1 = 0,	6, "20 28 24 01 30 03",
		0X02, 8, 1,                                    $ enum strings; UNIT; 1-Byte data
		"Motor Type", "", "",
		0, 7, 7,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param2 = 0,	6, "20 28 24 01 30 06",
		0X04, 2, 2,                                    $ scaling; 16-bit UINT; 2-Byte data
		"Rated Current", "Amp", "",
		0, 50000, 0,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param3 = 0,	6, "20 28 24 01 30 07",
		0X04, 2, 2,
		"Rated Voltage", "Volt", "",                   $ 
		0, 10000, 2000,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param4 = 0,	6, "20 28 24 01 30 08",
		0X04, 2, 2,
		"Rated Power",  "kW", "",                      $ 
		40, 65535, 65535,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param5 = 0,	6, "20 28 24 01 30 09",
		0X04, 2, 2,
		"Rated Frequency",   "Hz", "",                 $ 
		5000, 12000, 6000,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param6 = 0,	6, "20 28 24 01 30 0C",
		0X04, 2, 2,
		"Pole Count", "", "",                          $ see Param181
		2, 65535, 65535,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param7 = 0,	6, "20 28 24 01 30 0F",
		0X04, 2, 2,
		"Base Speed", "RPM", "",
		0, 12000, 1800,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param8 = 0,	6, "20 29 24 01 30 0A",                $ for padding only
		0X32, 8, 1,                                    $ 
		"", "", "",                                    $ 
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param9 = 0,	6, "20 29 24 01 30 0A",                $ for padding only
		0X32, 8, 1,                                    $ 
		"", "", "",                                    $ 
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

$class 0x29  control supervisor
	Param10 = 0, 6, "20 29 24 01 30 03",
		0X02, 8, 1,
		"Run1", "", "",                                $ Run1=STF
		0, 1, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param11 = 0, 6, "20 29 24 01 30 04",
		0X02, 8, 1,
		"Run2", "", "",                                $ Run2=STR
		0, 1, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param12 = 0, 6, "20 29 24 01 30 05",
		0X02, 8, 1,
		"Net Control", "", "",
		0, 1, 1,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param13 = 0, 6, "20 29 24 01 30 06",
		0X32, 8, 1,                                    $ monitor param, read only, enum strings;
		"State", "", "",                               $ UINT; 1-byte data
		0, 7, 3,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;
		 
	Param14 = 0, 6, "20 29 24 01 30 07",
		0X32, 8, 1,
		"Running1", "", "",
		0, 1, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param15 = 0, 6, "20 29 24 01 30 08",
		0X32, 8, 1,
		"Running2", "", "",
		0, 1, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param16 = 0, 6, "20 29 24 01 30 09",
		0X32, 8, 1,
		"Ready", "", "",
		0, 1, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param17 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"Faulted", "", "",
		0, 1, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param18 = 0, 6, "20 29 24 01 30 0A",               $ for padding only
		0X32, 8, 1,                                    $ 
		"", "", "",
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param19 = 0, 6, "20 29 24 01 30 0C",
		0X02, 8, 1,
		"Fault Reset", "", "",
		0, 1, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param20 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param21 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param22 = 0, 6, "20 29 24 01 30 0F",
		0X32, 8, 1,
		"Control From Net", "", "",
		0, 1, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param23 = 0, 6, "20 29 24 01 30 10",
		0X02, 8, 1,
		"DN Fault Mode", "", "",
		0, 2, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param24 = 0, 6, "20 29 24 01 30 0A",               $ for padding only
		0X32, 8, 1,                                    $  
		"", "", "",                                    $ 
		0, 0, 0,                                       $ 
		1, 1, 1, 0,                                    $ 
		0, 0, 0, 0,
		0;

	Param25 = 0, 6, "20 29 24 01 30 28",
		0X00, 8, 1,                                    $ nothing; UNIT; 1-Byte data
		"Input Assembly", "", "",
		70, 76, 71,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param26 = 0, 6, "20 29 24 01 30 29",
		0X00, 8, 1,
		"Output Assembly", "", "",
		20, 26, 21,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param27 = 0, 6, "20 29 24 01 30 0A",               $ for padding only
		0X32, 8, 1,                                    $ 
		"", "", "",                                    $ 
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param28 = 0, 6, "20 29 24 01 30 0A",               $ for padding only
		0X32, 8, 1,                                    $  
		"", "", "",                                    $ 
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param29 = 0, 6, "20 29 24 01 30 0A",               $ for padding only
		0X32, 8, 1,                                    $ 
		"", "", "",                                    $ 
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

$class 0x2A  Ac Drive
	Param30 = 0, 6, "20 2A 24 01 30 03",
		0X32, 8, 1,
		"At Reference", "", "",
		0, 1, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param31 = 0, 6, "20 2A 24 01 30 04",
		0X02, 8, 1,
		"Net Reference", "", "",
		0, 1, 1,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param32 = 0, 6, "20 2A 24 01 30 06",
		0X12, 8, 1,                                    $ read only, enum strings;
		"Drive Mode", "", "",                          $ UINT; 1-Byte data
		0, 5, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param33 = 0, 6, "20 2A 24 01 30 07",
		0X34, 2, 2,
		"Speed Actual", "RPM", "",                     $ see Param90
		0, 3600, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param34 = 0, 6, "20 2A 24 01 30 08",
		0X04, 2, 2,
		"Speed Reference", "RPM", "",
		0, 3600, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param35 = 0, 6, "20 2A 24 01 30 09",
		0X34, 2, 2,
		"Current Actual", "Amp", "",
		0, 200, 0,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param36 = 0, 6, "20 29 24 01 30 0A",               $ for padding only
		0X32, 8, 1,                                    $ 
		"", "", "",                                    $ 
		0, 0, 0,                                       $ 
		1, 1, 1, 0,                                    $ 
		0, 0, 0, 0,
		0;

	Param37 = 0, 6, "20 29 24 01 30 0A",               $ for padding only
		0X32, 8, 1,                                    $ 
		"", "", "",                                    $ 
		0, 0, 0,                                       $ 
		1, 1, 1, 0,                                    $ 
		0, 0, 0, 0,
		0;
 
	Param38 = 0, 6, "20 29 24 01 30 0A",               $ for padding only
		0X32, 8, 1,                                    $ 
		"", "", "",                                    $ 
		0, 0, 0,                                       $ 
		1, 1, 1, 0,                                    $ 
		0, 0, 0, 0,
		0;

	Param39 = 0, 6, "20 29 24 01 30 0A",               $ for padding only
		0X32, 8, 1,                                    $ 
		"", "", "",                                    $ 
		0, 0, 0,                                       $ 
		1, 1, 1, 0,                                    $ 
		0, 0, 0, 0,
		0;

	Param40 = 0, 6, "20 29 24 01 30 0A",               $ for padding only
		0X32, 8, 1,                                    $ 
		"", "", "",                                    $ 
		0, 0, 0,                                       $ 
		1, 1, 1, 0,                                    $ 
		0, 0, 0, 0,
		0;

	Param41 = 0, 6, "20 2A 24 01 30 0F",     
		0X34, 2, 2,                
		"Power Actl", "W", "",     
		0, 65535, 0,               
		10, 100, 1, 0,            
		0, 0, 0, 0,
		1;

	Param42 = 0, 6, "20 29 24 01 30 0A",               $ for padding only
		0X32, 8, 1,                                    $ 
		"", "", "",                                    $ 
		0, 0, 0,                                       $ 
		1, 1, 1, 0,                                    $ 
		0, 0, 0, 0,
		0;

	Param43 = 0, 6, "20 2A 24 01 30 11",
		0X34, 2, 2,
		"Output Voltage", "Volt", "",
		0, 4800, 0,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param44 = 0, 6, "20 2A 24 01 30 12",
		0X04, 2, 2,
		"Acceleration Time", "Sec", "",             
		0, 36000, 50,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param45 = 0, 6, "20 2A 24 01 30 13",
		0X04, 2, 2,
		"Deceleration Time", "Sec", "",            
		0, 36000, 50,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param46 = 0, 6, "20 2A 24 01 30 14",
		0X04, 2, 2,
		"Low Speed Limit", "RPM", "",                  $ cf. Pr.1
		0, 65535, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param47 = 0, 6, "20 2A 24 01 30 15",
		0X04, 2, 2,
		"High Speed Limit", "RPM", "",                 $ cf. Pr.2
		0, 65535, 3600,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;
	
	Param48 = 0, 6, "20 29 24 01 30 0A",               $ for padding only
		0X32, 8, 1,                                    $ 
		"", "", "",                                    $ 
		0, 0, 0,                                       $ 
		1, 1, 1, 0,                                    $ 
		0, 0, 0, 0,
		0;

    Param49 = 0, 6, "20 2A 24 01 30 B5",                   
		0X34, 2, 2,                              
		"RTM12: Peak V", "V", "",                             
		0, 10000, 0,                               
		10, 100, 1, 0,                           
		0, 0, 0, 0,
		1;

    Param50 = 0, 6, "20 2A 24 01 30 BA",                   
		0X34, 2, 2,                              
		"RTM17: Loadg Meter", "", "",                             
		0, 65535, 0,                               
		1, 1, 1, 0,                           
		0, 0, 0, 0,
		0;

    Param51 = 0, 6, "20 2A 24 01 30 BB",                   
		0X34, 2, 2,                              
		"RTM18: Motor Excitatn", "A", "",                             
		0, 65535, 0,                               
		10, 1000, 1, 0,                           
		0, 0, 0, 0,
		2;

    Param52 = 0, 6, "20 2A 24 01 30 BC",                   
		0X34, 2, 2,                              
		"RTM19: Positn Pulse", "", "",                             
		0, 65535, 0,                               
		1, 1, 1, 0,                           
		0, 0, 0, 0,
		0;

    Param53 = 0, 6, "20 2A 24 01 30 BD",                   
		0X34, 2, 2,                              
		"RTM20: Mult Energ t", "H", "",                             
		0, 65535, 0,                               
		1, 1, 1, 0,                           
		0, 0, 0, 0,
		0;

    Param54 = 0, 6, "20 2A 24 01 30 BF",                   
		0X34, 2, 2,                              
		"RTM22: Orient Status", "", "",                             
		0, 65535, 0,                               
		1, 1, 1, 0,                           
		0, 0, 0, 0,
		0;

    Param55 = 0, 6, "20 2A 24 01 30 C0",                   
		0X34, 2, 2,                              
		"RTM23: Act Op t", "H", "",                             
		0, 65535, 0,                               
		1, 1, 1, 0,                           
		0, 0, 0, 0,
		0;

    Param56 = 0, 6, "20 2A 24 01 30 C1",                   
		0X34, 2, 2,                              
		"RTM24: Motor Load Factr", "%", "",                             
		0, 65535, 0,                               
		10, 100, 1, 0,                           
		0, 0, 0, 0,
		1;

    Param57 = 0, 6, "20 2A 24 01 30 C2",                   
		0X34, 2, 2,                              
		"RTM25: Cumul Powr", "KWH", "",                             
		0, 65535, 0,                               
		1, 1, 1, 0,                           
		0, 0, 0, 0,
		0;

   Param58 = 0, 6, "20 2A 24 01 30 C7",                   
		0X34, 2, 2,                              
		"OPT F/W Ver", "", "",                             
		0, 65535, 0,                               
		1, 1, 1, 0,                           
		0, 0, 0, 0,
		0;

	
$$ A500 sys env vars
	Param59 = 0, 6, "20 29 24 01 30 0A",               $ for padding only
		0X32, 8, 1,                                    $ 
		"", "", "",                                    $ 
		0, 0, 0,                                       $ 
		1, 1, 1, 0,                                    $ 
		0, 0, 0, 0,
		0;
	
	Param60 = 0, 6, "20 29 24 01 30 0A",               $ for padding only
		0X32, 8, 1,                                    $ 
		"", "", "",                                    $ 
		0, 0, 0,                                       $ 
		1, 1, 1, 0,                                    $ 
		0, 0, 0, 0,
		0;
	
	Param61 = 0, 6, "20 29 24 01 30 0A",               $ for padding only
		0X32, 8, 1,                                    $ 
		"", "", "",                                    $ 
		0, 0, 0,                                       $ 
		1, 1, 1, 0,                                    $ 
		0, 0, 0, 0,
		0;
	
	Param62 = 0, 6, "20 29 24 01 30 0A",               $ for padding only
		0X32, 8, 1,                                    $ 
		"", "", "",                                    $ 
		0, 0, 0,                                       $ 
		1, 1, 1, 0,                                    $ 
		0, 0, 0, 0,
		0;
	
	Param63 = 0, 6, "20 29 24 01 30 0A",               $ for padding only
		0X32, 8, 1,                                    $ 
		"", "", "",                                    $ 
		0, 0, 0,                                       $ 
		1, 1, 1, 0,                                    $ 
		0, 0, 0, 0,
		0;
	
	Param64 = 0, 6, "20 29 24 01 30 0A",               $ for padding only
		0X32, 8, 1,                                    $ 
		"", "", "",                                    $ 
		0, 0, 0,                                       $ 
		1, 1, 1, 0,                                    $ 
		0, 0, 0, 0,
		0;
	   	
	Param65 = 0, 6, "20 29 24 01 30 0A",               $ for padding only
		0X32, 8, 1,                                    $ 
		"", "", "",                                    $ 
		0, 0, 0,                                       $ 
		1, 1, 1, 0,                                    $ 
		0, 0, 0, 0,
		0;
	
	Param66 = 0, 6, "20 29 24 01 30 0A",               $ for padding only
		0X32, 8, 1,                                    $ 
		"", "", "",                                    $ 
		0, 0, 0,                                       $ 
		1, 1, 1, 0,                                    $ 
		0, 0, 0, 0,
		0;
 
    Param67 = 0, 6, "20 29 24 01 30 0A",               $ for padding only
		0x32, 8, 1,                                    $ 
		"", "", "",                                    $ 
		0, 0, 0,                                       $ 
		1, 1, 1, 0,                                    $ 
		0, 0, 0, 0,
		0;

    Param68 = 0, 6, "20 29 24 01 30 0A",               $ for padding only
		0x32, 8, 1,                                    $ 
		"", "", "",                                    $ 
		0, 0, 0,                                       $ 
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

    Param69 = 0, 6, "20 2A 24 01 30 70",                  
		0X04, 2, 2,                               
		"Running Freq (RAM)", "Hz", "",                $ see Param89, 0x0038            
		0, 40000, 6000,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

    Param70 = 0, 6, "20 29 24 01 30 0A",               $ for padding only
		0X32, 8, 1,                                    $ 
		"", "", "",                                    $ 
		0, 0, 0,                                  
		1, 1, 1, 0,                               
		0, 0, 0, 0,
		0;

 	Param71 = 0, 6, "20 2A 24 01 30 72",
		0X04, 2, 2,
		"R:INV Status/W:Ctrl Inp Cmd", "", "",
		0, 65535, 2047,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

   Param72 = 0,	 6, "20 29 24 01 30 0A",               $ for padding only
		0X32, 8, 1,                                    $ 
		"", "", "",                                    $ 
		0, 0, 0,                                  
		1, 1, 1, 0,                               
		0, 0, 0, 0,
		0;

	Param73 = 0, 6, "20 29 24 01 30 0A",                         
		0x32, 8, 1,                                     
		"", "", "",                                     
		0, 0, 0,                                        
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param74 = 0, 6, "20 29 24 01 30 0A",                         
		0x32, 8, 1,                                     
		"", "", "",                                     
		0, 0, 0,                                        
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param75 = 0, 6, "20 2A 24 01 30 78",
		0X04, 2, 2,
		"R:Op Mode/W:INV Config", "", "",
		0, 0xFFFF, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param76 = 0, 6, "20 2A 24 01 30 8D",
		0X04, 2, 2,                                    
		"R:Alarm History 1/W:AlarmHisAllClr", "", "",  $ 16-bit UINT; 2-Byte data
		0, 0xFFFF, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param77 = 0, 6, "20 2A 24 01 30 8E",
		0X30, 2, 2,                                    $ param data, monitor, read only
		"Alarm History 2", "", "",
		0, 0xFFFF, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param78 = 0, 6, "20 2A 24 01 30 8F",
		0X30, 2, 2,
		"Alarm History 3", "", "",
		0, 0xFFFF, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param79 = 0, 6, "20 2A 24 01 30 90",
		0X30, 2, 2,
		"Alarm History 4", "", "",
		0, 0xFFFF, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param80 = 0, 6, "20 2A 24 01 30 91",
		0X30, 2, 2,
		"Alarm History 5", "", "",
		0, 0xFFFF, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param81 = 0, 6, "20 2A 24 01 30 92",
		0X30, 2, 2,
		"Alarm History 6", "", "",
		0, 0xFFFF, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param82 = 0, 6, "20 2A 24 01 30 93",
		0X30, 2, 2,
		"Alarm History 7", "", "",
		0, 0xFFFF, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param83 = 0, 6, "20 2A 24 01 30 94",
		0X30, 2, 2,
		"Alarm History 8", "", "",
		0, 0xFFFF, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

    Param84 = 0, 6, "20 29 24 01 30 0A",               $ for padding only
		0X32, 8, 1,                                    $ 
		"", "", "",                                    $ 
		0, 0, 0,                                       $ 
		1, 1, 1, 0,                                    $ 
		0, 0, 0, 0,
		0;

	Param85 = 0, 6, "20 29 24 01 30 0A",               $ for padding only
		0X32, 8, 1,                                    $ 
		"", "", "",                                    $ 
		0, 0, 0,                                       $ 
		1, 1, 1, 0,                                    $ 
		0, 0, 0, 0,
		0;

	Param86 = 0, 6, "20 2A 24 01 30 AA",
		0X34, 2, 2,
		"RTM1: Output Frequency", "Hz", "",
		0, 12000, 0,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param87 = 0, 6, "20 2A 24 01 30 AB",
		0X34, 2, 2,
		"RTM2: Output Current", "Amp", "",
		0, 200, 0,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param88 = 0, 6, "20 2A 24 01 30 AC",
		0X34, 2, 2,
		"RTM3: Output Voltage", "Volt", "",
		0, 10000, 0,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param89 = 0, 6, "20 2A 24 01 30 AE",
		0X34, 2, 2,
		"RTM5: f Sett Val", "Hz", "",                        $ see Params69,70
		0, 12000, 0,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

 	Param90 = 0, 6, "20 2A 24 01 30 AF",
		0X34, 2, 2,
		"RTM6: Running Speed", "RPM", "",                    $ see Param3
		0, 3600, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param91 = 0, 6, "20 2A 24 01 30 B0",
		0X34, 2, 2,
		"RTM7: Motor Torque", "", "",
		0, 2000, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param92 = 0, 6, "20 2A 24 01 30 B1",
		0X34, 2, 2,
		"RTM8: Converter Voltage", "Volt", "",
		0, 65535, 0,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param93 = 0, 6, "20 2A 24 01 30 B2",
		0X34, 2, 2,
		"RTM9: Brake Duty", "", "",
		0, 100, 0,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param94 = 0, 6, "20 2A 24 01 30 B3",
		0X34, 2, 2,
		"RTM10: Load Factor", "", "",
		0, 100, 0,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param95 = 0, 6, "20 2A 24 01 30 B4",
		0X34, 2, 2,
		"RTM11: Peak Current", "Amp", "",
		0, 200, 0,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param96 = 0, 6, "20 2A 24 01 30 B6",
		0X34, 2, 2,
		"RTM13: Input Power", "", "",
		0, 100, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param97 = 0, 6, "20 2A 24 01 30 B7",
		0X34, 2, 2,
		"RTM14: Output Power", "", "",
		0, 100, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

    Param98 = 0, 6, "20 2A 24 01 30 B8",                   
		0X34, 2, 2,                              
		"RTM15: Inp Terminal", "", "",                             
		0, 65535, 0,                               
		1, 1, 1, 0,                           
		0, 0, 0, 0,
		0;

    Param99 = 0, 6, "20 2A 24 01 30 B9",              
		0X34, 2, 2,                         
		"RTM16: Outp Terminal", "", "",                        
		0, 65535, 0,                                  
		1, 1, 1, 0,                              
		0, 0, 0, 0,
		0;

$class 0x66  A500_66
	Param100 = 0, 6, "20 66 24 01 30 0A",
		0X04, 2, 2,
		"Pr0 Torque Boost", "%", "",
		0, 300, 20,                                    $ 4.1 entered, 4.0 displayed
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param101 = 0, 6, "20 66 24 01 30 0B",
		0X04, 2, 2,
		"Pr1 Max Freq Limit",  "Hz", "",                   $ 
		0, 65535, 12000,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param102 = 0, 6, "20 66 24 01 30 0C",
		0X04, 2, 2,
		"Pr2 Min Freq Limit", "Hz", "",                    $ 
		0, 12000, 0,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param103 = 0, 6, "20 66 24 01 30 0D",
		0X04, 2, 2,
		"Pr3 Base Frequency", "Hz", "",
		0, 40000, 6000,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param104 = 0, 6, "20 66 24 01 30 0E",
		0X04, 2, 2,
		"Pr4 Multi-Speed Setting (High Speed)", "Hz", "",
		0, 40000, 6000,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param105 = 0, 6, "20 66 24 01 30 0F",
		0X04, 2, 2,
		"Pr5 Multi-Speed Setting (Middle Speed)", "Hz", "",
		0, 40000, 3000,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param106 = 0, 6, "20 66 24 01 30 10",
		0X04, 2, 2,
		"Pr6 Multi-Speed Setting (Low Speed)", "Hz", "",
		0, 40000, 1000,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param107 = 0, 6, "20 66 24 01 30 11",
		0X04, 2, 2,
		"Pr7 Acceleration Time", "Sec", "",
		0, 36000, 50,                                  $ 5.1 entered, 5.0 displayed
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param108 = 0, 6, "20 66 24 01 30 12",
		0X04, 2, 2,
		"Pr8 Deceleration Time", "Sec", "",
		0, 36000, 50,                                  $ 5.1 entered, 5.0 displayed
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param109 = 0, 6, "20 66 24 01 30 13",
		0X04, 2, 2,
		"Pr9 Elec Thermal O/L Relay", "Amp", "",
		0, 50000, 200,                                   $ default=Rated Outp I
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;
		 
	Param110 = 0, 6, "20 66 24 01 30 14",
		0X04, 2, 2,
		"Pr10 DC Dynamic Brake Operation Frequency", "Hz", "",
		0, 65535, 300,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param111 = 0, 6, "20 66 24 01 30 15",
		0X04, 2, 2,
		"Pr11 DC Dynamic Brake Operation Time", "Sec", "",
		0, 100, 5,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1; 

	Param112 = 0, 6, "20 66 24 01 30 16",
		0X04, 2, 2,
		"Pr12 DC Dynamic Brake Voltage", "%", "",
		0, 300, 20,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param113 = 0, 6, "20 66 24 01 30 17",
		0X04, 2, 2,
		"Pr13 Starting Frequency", "Hz", "",
		0, 6000, 50,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param114 = 0, 6, "20 66 24 01 30 18",
		0X02, 2, 2,
		"Pr14 Applied Load Selection", "", "",
		0, 5, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param115 = 0, 6, "20 66 24 01 30 19",
		0X04, 2, 2,
		"Pr15 Jog Frequency", "Hz", "",
		0, 40000, 500,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param116 = 0, 6, "20 66 24 01 30 1A",
		0X04, 2, 2,
		"Pr16 Jog Accel/Decel Time", "Sec", "",
		0, 36000, 5,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param117 = 0, 6, "20 66 24 01 30 1B",
		0X02, 2, 2,                                    $ enum strings; 16-bit UINT; 2-Byte data
		"Pr17 MRS Input Selection", "", "",
		0, 2, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;
  
	Param118= 0, 6, "20 66 24 01 30 1C",
		0X04, 2, 2,
		"Pr18 High Speed Max Freq Limit", "Hz", "",
		12000, 40000, 12000,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param119 = 0, 6, "20 66 24 01 30 1D",
		0X04, 2, 2,                                    $ scaling; 16-bit UINT; 2-Byte data
		"Pr19 Base Frequency Voltage", "Volt", "",
		0, 65535, 65535,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param120 = 0, 6, "20 66 24 01 30 1E",
		0X04, 2, 2,
		"Pr20 Accel/Decel Ref Freq", "Hz", "",
		0, 40000, 6000,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param121 = 0, 6, "20 66 24 01 30 1F",
		0X02, 2, 2,
		"Pr21 Accel/Decel Time Increments", "", "",
		0, 1, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param122 = 0, 6, "20 66 24 01 30 20", 
		0X04, 2, 2,
		"Pr22 Stall Prevention Operation Level", "%", "",
		0, 65535, 1500,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param123 = 0, 6, "20 66 24 01 30 21", 
		0X04, 2, 2,
		"Pr23 High Speed Stall Prevention Operation Level", "%", "",
		0, 65535, 65535,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param124 = 0, 6, "20 66 24 01 30 22", 
		0X04, 2, 2,
		"Pr24 Multi-Speed Setting (Speed 4)", "Hz", "",
		0, 65535, 65535,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param125 = 0, 6, "20 66 24 01 30 23", 
		0X04, 2, 2,
		"Pr25 Multi-Speed Setting (Speed 5)", "Hz", "",
		0, 65535, 65535,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param126 = 0, 6, "20 66 24 01 30 24", 
		0X04, 2, 2,
		"Pr26 Multi-Speed Setting (Speed 6)", "Hz", "",
		0, 65535, 65535,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;
 
	Param127 = 0, 6, "20 66 24 01 30 25", 
		0X04, 2, 2,
		"Pr27 Multi-Speed Setting (Speed 7)", "Hz", "",
		0, 65535, 65535,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param128 = 0, 6, "20 66 24 01 30 26", 
		0X02, 2, 2,
		"Pr28 Multi-Speed Input Compensation", "", "",
		0, 1, 0,
		1 , 1 , 1, 0,
		0, 0, 0, 0,
		0;
 
	Param129 = 0, 6, "20 66 24 01 30 27", 
		0X02, 2, 2,
		"Pr29 Acceleration/Deceleration Pattern", "", "",
		0, 3, 0,
		1, 1 , 1, 0,
		0, 0, 0, 0,
		0;

	Param130 = 0, 6, "20 66 24 01 30 28", 
		0X02, 2, 2,
		"Pr30 External Brake Resistor Selection", "", "",
		0, 2, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param131 = 0, 6, "20 66 24 01 30 29", 
		0X04, 2, 2,
		"Pr31 Frequency Jump 1A", "Hz", "",
		0, 65535, 65535,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param132 = 0, 6, "20 66 24 01 30 2A", 
		0X04, 2, 2,
		"Pr32 Frequency Jump 1B", "Hz", "",
		0, 65535, 65535,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param133 = 0, 6, "20 66 24 01 30 2B", 
		0X04, 2, 2,
		"Pr33 Frequency Jump 66", "Hz", "",
		0, 65535, 65535,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param134 = 0, 6, "20 66 24 01 30 2C", 
		0X04, 2, 2,
		"Pr34 Frequency Jump 2B", "Hz", "",
		0, 65535, 65535,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param135 = 0, 6, "20 66 24 01 30 2D", 
		0X04, 2, 2,
		"Pr35 Frequency Jump 3A", "Hz", "",
		0, 65535, 65535,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param136 = 0, 6, "20 66 24 01 30 2E", 
		0X04, 2, 2,
		"Pr36 Frequency Jump 3B", "Hz", "",
		0, 65535, 65535,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param137 = 0, 6, "20 66 24 01 30 2F", 
		0X04, 2, 2,
		"Pr37 Speed Display", "", "",
		0, 9998, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

   Param138 = 0, 6, "20 29 24 01 30 0A",               $ for padding only
		0X32, 8, 1,                                    $ 
		"", "", "",                                    $ 
		0, 0, 0,                                  
		1, 1, 1, 0,                               
		0, 0, 0, 0,
		0;
	  
   Param139 = 0, 6, "20 29 24 01 30 0A",               $ for padding only
		0X32, 8, 1,                                    $ 
		"", "", "",                                    $ 
		0, 0, 0,                                  
		1, 1, 1, 0,                               
		0, 0, 0, 0,
		0;

   Param140 = 0, 6, "20 29 24 01 30 0A",               $ for padding only
		0X32, 8, 1,                                    $ 
		"", "", "",                                    $ 
		0, 0, 0,                                  
		1, 1, 1, 0,                               
		0, 0, 0, 0,
		0;

   Param141 = 0, 6, "20 66 24 01 30 33", 
		0X04, 2, 2,
		"Pr41 Up-to-Frequency Sensitivity", "", "%",
		0, 1000, 100,
		10, 100 , 1, 0,
		0, 0, 0, 0,
		1;

	Param142 = 0, 6, "20 66 24 01 30 34", 
		0X04, 2, 2,
		"Pr42 Output Freq Detect FWD", "Hz", "",
		0, 40000, 600,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param143 = 0, 6, "20 66 24 01 30 35", 
		0X04, 2, 2,
		"Pr43 Output Freq Detect REV", "Hz", "",
		0, 65535, 65535,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param144 = 0, 6, "20 66 24 01 30 36", 
		0X04, 2, 2,
		"Pr44 Second Accel/Decel Time", "Sec", "Sec",
		0, 36000, 50,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param145 = 0, 6, "20 66 24 01 30 37", 
		0X04, 2, 2,
		"Pr45 Second Deceleration Time", "Sec", "Sec",
		0, 65535, 65535,
		10, 100 , 1, 0,
		0, 0, 0, 0,
		1;

	Param146 = 0, 6, "20 66 24 01 30 38", 
		0X04, 2, 2,
		"Pr46 Second Torque Boost", "%", "",
		0, 65535, 65535,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param147 = 0, 6, "20 66 24 01 30 39", 
		0X04, 2, 2,
		"Pr47 Second V/F (base frequency)", "Hz", "",
		0, 65535, 65535,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param148 = 0, 6, "20 66 24 01 30 3A", 
		0X04, 2, 2,
		"Pr48 Second Stall Prevention Level (Current)", "%", "",
		0, 2000, 1500,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param149 = 0, 6, "20 66 24 01 30 3B", 
		0X04, 2, 2,
		"Pr49 Second Stall Prevention Level (Frequency)", "Hz", "",
		0, 65535, 0,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param150 = 0, 6, "20 66 24 01 30 3C", 
		0X04, 2, 2,
		"Pr50 Second Output Frequency Detection", "Hz", "",
		0,40000, 3000,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param151 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param152 = 0, 6, "20 66 24 01 30 3E", 
		0X04, 2, 2,
		"Pr52 PU Main Display Data Selection", "", "",
		0, 100, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param153 = 0, 6, "20 66 24 01 30 3F", 
		0X04, 2, 2,
		"Pr53 PU Level Display Data Selection", "", "",
		0, 18, 1,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param154 = 0, 6, "20 66 24 01 30 40", 
		0X04, 2, 2,
		"Pr54 FM Terminal Function Selection", "", "",
		1, 21, 1,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param155 = 0, 6, "20 66 24 01 30 41", 
		0X04, 2, 2,
		"Pr55 Frequency Monitoring Reference", "Hz", "",
		0, 40000, 6000,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param156 = 0, 6, "20 66 24 01 30 42", 
		0X04, 2, 2,
		"Pr56 Current Monitoring Reference", "Amp", "",
		0, 50000, 200,                                   $ default=Rated Outp I
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param157 = 0, 6, "20 66 24 01 30 43", 
		0X04, 2, 2,
		"Pr57 Coasting Time For Automatic Restart", "Sec", "",
		0, 65535, 65535,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param158 = 0, 6, "20 66 24 01 30 44", 
		0X04, 2, 2,
		"Pr58 Automatic Restart Cushion Time", "Sec", "",
		0, 600, 10,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param159 = 0, 6, "20 66 24 01 30 45", 
		0X02, 2, 2,
		"Pr59 Remote Setting Function Selection", "", "",
		0, 2, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param160 = 0, 6, "20 66 24 01 30 46", 
		0X02, 2, 2,
		"Pr60 Intelligent Mode Selection", "", "",
		0, 8, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param161 = 0, 6, "20 66 24 01 30 47", 
		0X04, 2, 2,
		"Pr61 Reference Current", "Amp", "",                     $Prerex: Pr60!=0
		0, 65535, 65535,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param162 = 0, 6, "20 66 24 01 30 48", 
		0X04, 2, 2,
		"Pr62 Reference Current for Acceleration", "%", "",      $Prerex: Pr60!=0
		0, 65535, 65535,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param163 = 0, 6, "20 66 24 01 30 49", 
		0X04, 2, 2,
		"Pr63 Reference Current for Deceleration", "%", "",      $Prerex: Pr60!=0
		0, 65535, 65535,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param164 = 0, 6, "20 66 24 01 30 4A", 
		0X04, 2, 2,
		"Pr64 Starting Frequency for Elevator Mode", "Hz", "",   $Prerex: Pr60!=0
		0, 65535, 65535,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param165 = 0, 6, "20 66 24 01 30 4B", 
		0X02, 2, 2,
		"Pr65 Retry Selection", "", "",
		0, 5, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param166 = 0, 6, "20 66 24 01 30 4C", 
		0X04, 2, 2,
		"Pr66 Stall Prevention Operation Reduction Starting Frequency", "Hz", "",
		0, 40000, 6000,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param167 = 0, 6, "20 66 24 01 30 4D", 
		0X04, 2, 2,
		"Pr67 Number of Retries at Alarm Occurence", "", "",
		0, 110, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param168 = 0, 6, "20 66 24 01 30 4E", 
		0X04, 2, 2,
		"Pr68 Retry Waiting Time", "Sec", "",
		0, 100, 10,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param169 = 0, 6, "20 66 24 01 30 4F", 
		0X04, 2, 2,
		"Pr69 Retry Count Display Erasure", "", "",
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param170 = 0, 6, "20 66 24 01 30 50", 
		0X04, 2, 2,
		"Pr70 Special Regenerative Brake Duty", "%", "",     $Prerex: Pr30!=0 
		0, 300, 0,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param171 = 0, 6, "20 66 24 01 30 51", 
		0X04, 2, 2,
		"Pr71 Applied Motor", "", "",
		0, 24, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param172 = 0, 6, "20 66 24 01 30 52", 
		0X04, 2, 2,
		"Pr72 PWM Frequency Selection", "", "",
		0, 15, 2,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param173 = 0, 6, "20 66 24 01 30 53", 
		0X04, 2, 2,
		"Pr73 0 to 5v, 0 to 10v Selection", "", "",
		0, 15, 1,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param174 = 0, 6, "20 66 24 01 30 54", 
		0X04, 2, 2,
		"Pr74 Input Filter Time Constant", "", "",
		0, 8, 1,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param175 = 0, 6, "20 66 24 01 30 55", 
		0X02, 2, 2,
		"Pr75 Reset Selection/PU Disconnection Detection", "", "",
		0, 17, 14,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param176 = 0, 6, "20 66 24 01 30 56", 
		0X02, 2, 2,
		"Pr76 Alarm Code Output Selection", "", "",
		0, 3, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param177 = 0, 6, "20 66 24 01 30 57", 
		0X02, 2, 2,
		"Pr77 Parameter Write Disable Selection", "", "",
		0, 2, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param178 = 0, 6, "20 66 24 01 30 58", 
		0X02, 2, 2,
		"Pr78 Reverse Rotation Prevention Selection", "", "",
		0, 2, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param179 = 0, 6, "20 66 24 01 30 59", 
		0X02, 2, 2,
		"Pr79 Operation Mode Selection", "", "",
		0, 8, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param180 = 0, 6, "20 66 24 01 30 5A", 
		0X04, 2, 2,
		"Pr80 Motor Capacity", "kW", "",                    $ see Param8
		40, 65535, 65535,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param181 = 0, 6, "20 66 24 01 30 5B", 
		0X04, 2, 2,
		"Pr81 Number of Motor Poles", "", "",               $ see Param6
		2, 65535, 65535,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param182 = 0, 6, "20 66 24 01 30 5C", 
		0X34, 2, 2,
		"Pr82 Set by Manufacturer", "", "",
		0, 65535, 65535,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param183 = 0, 6, "20 66 24 01 30 5D", 
		0X04, 2, 2,
		"Pr83 Rated Motor Voltage",   "Volt", "",           $ see Param7                                                 
		0, 10000, 2000,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param184 = 0, 6, "20 66 24 01 30 5E", 
		0X04, 2, 2,
		"Pr84 Rated Motor Frequency", "Hz", "",             $ see Param9
		5000, 12000, 6000,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

   Param185 = 0, 6, "20 29 24 01 30 0A",               $ for padding only
		0X32, 8, 1,                                    $ 
		"", "", "",                                    $ 
		0, 0, 0,                                  
		1, 1, 1, 0,                               
		0, 0, 0, 0,
		0;

	Param186 = 0, 6, "20 66 24 01 30 60",
		0X04, 2, 2,
		"Pr86 Ex. Curr. Lo. Speed Mag.", "%", "",
		0, 10000, 1300,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

    Param187 = 0, 6, "20 29 24 01 30 0A",              $ for padding only
		0X32, 8, 1,                                    $ 
		"", "", "",                                    $ 
		0, 0, 0,                                  
		1, 1, 1, 0,                               
		0, 0, 0, 0,
		0;

	Param188 = 0, 6, "20 66 24 01 30 62",
		0X04, 2, 2,
		"Pr88 Q Axis Control Gain", "%", "",
		0, 10000, 1000,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param189 = 0, 6, "20 66 24 01 30 63",
		0X04, 2, 2,
		"Pr89 Speed Control Gain", "%", "",
		0, 2000, 1000,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param190 = 0, 6, "20 66 24 01 30 64",
		0X04, 2, 2,
		"Pr90 Motor Constant R1", "mOhms", "",
		0, 65535, 65535,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param191 = 0, 6, "20 66 24 01 30 65",
		0X04, 2, 2,
		"Pr91 Motor Constant R2", "mOhms", "",
		0, 65535, 65535,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param192 = 0, 6, "20 66 24 01 30 66",
		0X04, 2, 2,
		"Pr92 Motor Constant L1", "mOhms", "",
		0, 65535, 65535,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param193 = 0, 6, "20 66 24 01 30 67",
		0X04, 2, 2,
		"Pr93 Motor Constant L2", "mOhms", "",
		0, 65535, 65535,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param194 = 0, 6, "20 66 24 01 30 68",
		0X04, 2, 2,
		"Pr94 Motor Constant X", "%", "",
		0, 65535, 65535,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param195 = 0, 6, "20 66 24 01 30 69",
		0X02, 2, 2,
		"Pr95 Adv Mode", "", "",
		0, 1, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param196 = 0, 6, "20 66 24 01 30 6A",
		0X00, 2, 2,
		"Pr96 Auto Tuning Setting/State", "", "",
		0, 101, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

    Param197 = 0, 6, "20 29 24 01 30 0A",              $ for padding only
		0X32, 8, 1,                                    $ 
		"", "", "",                                    $ 
		0, 0, 0,                                  
		1, 1, 1, 0,                               
		0, 0, 0, 0,
		0;

    Param198 = 0, 6, "20 29 24 01 30 0A",              $ for padding only
		0X32, 8, 1,                                    $ 
		"", "", "",                                    $ 
		0, 0, 0,                                  
		1, 1, 1, 0,                               
		0, 0, 0, 0,
		0;

     Param199 = 0, 6, "20 29 24 01 30 0A",             $ for padding only
		0X32, 8, 1,                                    $ 
		"", "", "",                                    $ 
		0, 0, 0,                                  
		1, 1, 1, 0,                               
		0, 0, 0, 0,
		0;

	Param200 = 0, 6, "20 66 24 01 30 6E",		       $Prerex: Pr19=Inp V, Pr71=2
		0X04, 2, 2,
		"Pr100-V/F 1 (1st f)", "Hz", "",
		0, 65535, 65535,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param201 = 0, 6, "20 66 24 01 30 6F",
		0X04, 2, 2,
		"Pr101-V/F 1 (1st f V)", "V", "",			   $Prerex: Pr19=Inp V, Pr71=2
		0, 10000, 0,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param202 = 0, 6, "20 66 24 01 30 70",
		0X04, 2, 2,
		"Pr102-V/F 2 (2nd f)", "Hz", "",		       $Prerex: Pr19=Inp V, Pr71=2
		0, 65535, 65535,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param203 = 0, 6, "20 66 24 01 30 71",
		0X04, 2, 2,
		"Pr103-V/F 2 (2nd f V)", "V", "",			   $Prerex: Pr19=Inp V, Pr71=2
		0, 10000, 0,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param204 = 0, 6, "20 66 24 01 30 72",
		0X04, 2, 2,
		"Pr104-V/F 3 (3rd f)", "Hz", "",			   $Prerex: Pr19=Inp V, Pr71=2
		0, 65535, 65535,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param205 = 0, 6, "20 66 24 01 30 73",
		0X04, 2, 2,
		"Pr105-V/F 3 (3rd f V)", "V", "",			   $Prerex: Pr19=Inp V, Pr71=2
		0, 10000, 0,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param206 = 0, 6, "20 66 24 01 30 74",
		0X04, 2, 2,
		"Pr106-V/F 4 (4th f)", "Hz", "",			   $Prerex: Pr19=Inp V, Pr71=2
		0, 65535, 65535,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param207 = 0, 6, "20 66 24 01 30 75",
		0X04, 2, 2,
		"Pr107-V/F 4 (4th f V)", "V", "",			   $Prerex: Pr19=Inp V, Pr71=2
		0, 10000, 0,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param208 = 0, 6, "20 66 24 01 30 76",
		0X04, 2, 2,
		"Pr108-V/F 5 (5th f)", "Hz", "",			   $Prerex: Pr19=Inp V, Pr71=2
		0, 65535, 65535,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param209 = 0, 6, "20 66 24 01 30 77",
		0X04, 2, 2,
		"Pr109-V/F 5 (5th f V)", "V", "",			   $Prerex: Pr19=Inp V, Pr71=2
		0, 10000, 0,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param210 = 0, 6, "20 66 24 01 30 78",
		0X04, 2, 2,
		"Pr110-3rd Acc/Dec t", "s", "",
		0, 65535, 65535,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param211 = 0, 6, "20 66 24 01 30 79",
		0X04, 2, 2,
		"Pr111-3rd Dec t", "s", "",
		0, 65535, 65535,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param212 = 0, 6, "20 66 24 01 30 7A",
		0X04, 2, 2,
		"Pr112-3rd Torq Boost", "%", "",
		0, 65535, 65535,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param213 = 0, 6, "20 66 24 01 30 7B",
		0X04, 2, 2,
		"Pr113-3rd V/F (Base f)", "Hz", "",
		0, 65535, 65535,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param214 = 0, 6, "20 66 24 01 30 7C",
		0X04, 2, 2,
		"Pr114-3rd Stall Preventn Op I", "%", "",
		0, 2000, 1500,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param215 = 0, 6, "20 66 24 01 30 7D",
		0X04, 2, 2,
		"Pr115-3rd Stall Preventn Op f", "Hz", "",
		0, 40000, 0,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param216 = 0, 6, "20 66 24 01 30 7E",
		0X04, 2, 2,
		"Pr116-3rd Out f Detectn", "Hz", "",
		0, 65535, 65535,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param217 = 0, 6, "20 66 24 01 30 7F",
		0X04, 2, 2,
		"Pr117-Statn No.", "", "",
		0, 31, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param218 = 0, 6, "20 66 24 01 30 80",
		0X04, 2, 2,
		"Pr118-Comms Spd", "", "",
		48, 192, 192,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param219 = 0, 6, "20 66 24 01 30 81",
		0X04, 2, 2,
		"Pr119-Stop Bit Length", "", "",
		0, 11, 1,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param220 = 0, 6, "20 66 24 01 30 82",
		0X04, 2, 2,
		"Pr120-Parity Check Presence/Absence", "", "",
		0, 2, 2,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param221 = 0, 6, "20 66 24 01 30 83",
		0X04, 2, 2,
		"Pr121-No. Of Comms Retries", "", "",
		0, 65535, 1,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param222 = 0, 6, "20 66 24 01 30 84",
		0X04, 2, 2,
		"Pr122-Comms Check t Interval", "s", "",
		0, 65535, 0,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param223 = 0, 6, "20 66 24 01 30 85",
		0X04, 2, 2,
		"Pr123-Waitg t Sett", "ms", "",
		0, 65535, 65535,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param224 = 0, 6, "20 66 24 01 30 86",
		0X04, 2, 2,
		"Pr124-CR,LF Presence/Absence Seln", "", "",
		0, 2, 1,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param225 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param226 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param227 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param228 = 0, 6, "20 66 24 01 30 8A",
		0X04, 2, 2,
		"Pr128-PID Actn Seln", "", "",
		10, 21, 10,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param229 = 0, 6, "20 66 24 01 30 8B",
		0X04, 2, 2,
		"Pr129-PID Proportnl Band", "%", "",
		1, 65535, 1000,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param230 = 0, 6, "20 66 24 01 30 8C",
		0X04, 2, 2,
		"Pr130-PID Integral t", "s", "",
		1, 65535, 10,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param231 = 0, 6, "20 66 24 01 30 8D",
		0X04, 2, 2,
		"Pr131-PID Uppr Limit", "%", "",
		0, 65535, 65535,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param232 = 0, 6, "20 66 24 01 30 8E",
		0X04, 2, 2,
		"Pr132-PID Lowr Limit", "%", "",
		0, 65535, 65535,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param233 = 0, 6, "20 66 24 01 30 8F",
		0X04, 2, 2,
		"Pr133-PID Actn Set Pt For PU Op", "%", "",
		0, 10000, 0,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param234 = 0, 6, "20 66 24 01 30 90",
		0X04, 2, 2,
		"Pr134-PID Differential t", "s", "",
		1, 65535, 65535,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param235 = 0, 6, "20 66 24 01 30 91",
		0X04, 2, 2,
		"Pr135-CPS-INV Swc-Over Seq Outp Termnl Seln", "", "",
		0, 2, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param236 = 0, 6, "20 66 24 01 30 92",
		0X04, 2, 2,
		"Pr136-MC Swc-Over Interlock t", "s", "",
		0, 1000, 10,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param237 = 0, 6, "20 66 24 01 30 93",
		0X04, 2, 2,
		"Pr137-Start Waitg t", "s", "",
		0, 1000, 5,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param238 = 0, 6, "20 66 24 01 30 94",
		0X04, 2, 2,
		"Pr138-CPS-INV Swc-Over Seln At Alarm Occur", "", "",
		0, 1, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param239 = 0, 6, "20 66 24 01 30 95",
		0X04, 2, 2,
		"Pr139-Auto INV-CPS Swc-Over f", "Hz", "",
		0, 65535, 65535,
		10, 1000, 1, 0,
		0, 0, 0, 0,
	    2;

	Param240 = 0, 6, "20 66 24 01 30 96",
		0X04, 2, 2,
		"Pr140-Backlash Acc Stopg f", "Hz", "",		   $Prerex: Pr29=3
		0, 40000, 100,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param241 = 0, 6, "20 66 24 01 30 97",
		0X04, 2, 2,
		"Pr141-Backlash Acc Stopg t", "s", "",		   $Prerex: Pr29=3
		0, 3600, 5,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param242 = 0, 6, "20 66 24 01 30 98",
		0X04, 2, 2,
		"Pr142-Backlash Dec Stopg f", "Hz", "",		   $Prerex: Pr29=3
		0, 40000, 100,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param243 = 0, 6, "20 66 24 01 30 99",
		0X04, 2, 2,
		"Pr143-Backlash Dec Stopg t", "s", "",		   $Prerex: Pr29=3
		0, 3600, 5,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param244 = 0, 6, "20 66 24 01 30 9A",
		0X04, 2, 2,
		"Pr144-Spd Sett Swc-Over", "", "",
		0, 110, 4,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param245 = 0, 6, "20 66 24 01 30 9B",
		0X02, 2, 2,
		"Pr145 -PU Lang. Switch", "", "",
		0, 7, 1,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param246 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param247 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param248 = 0, 6, "20 66 24 01 30 9E",
		0X04, 2, 2,
		"Pr148-Stall Preventn Level At 0V Inp", "%", "",
		0, 2000, 1500,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param249 = 0, 6, "20 66 24 01 30 9F",
		0X04, 2, 2,
		"Pr149-Stall Preventn level At 10V Inp", "%", "",
		0, 2000, 2000,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param250 = 0, 6, "20 66 24 01 30 A0",
		0X04, 2, 2,
		"Pr150-Outp I Detectn Level", "%", "",
		0, 2000, 1500,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param251 = 0, 6, "20 66 24 01 30 A1",
		0X04, 2, 2,
		"Pr151-Outp I Detectn Period", "s", "",
		0, 100, 0,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param252 = 0, 6, "20 66 24 01 30 A2",
		0X04, 2, 2,
		"Pr152-0-I Detectn Level", "%", "",
		0, 2000, 50,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param253 = 0, 6, "20 66 24 01 30 A3",
		0X04, 2, 2,
		"Pr153-0-I Detectn Period", "s", "",
		0, 100, 50,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param254 = 0, 6, "20 66 24 01 30 A4",
		0X04, 2, 2,
		"Pr154-V Reductn Seln During Stall Preventn Op", "", "",
		0, 1, 1,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param255 = 0, 6, "20 66 24 01 30 A5",
		0X04, 2, 2,
		"Fn155-RT Activated Condition", "", "",
		0, 10, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

 	Param256 = 0, 6, "20 66 24 01 30 A6",
 		0X04, 2, 2,
 		"Fn156-Stall Prevention Selection", "", "",
 		0, 100, 0,
 		1, 1, 1, 0,
 		0, 0, 0, 0,
 		0;
 
	Param257 = 0, 6, "20 66 24 01 30 A7",
		0X04, 2, 2,
		"Fn157-OL Signal Waiting", "Sec", "",
		0, 65535, 0,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param258 = 0, 6, "20 66 24 01 30 A8",
		0X04, 2, 2,
		"Fn158-AM Terminal Function Selection", "", "",
		1, 21, 1,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

    Param259 = 0,	 6, "20 29 24 01 30 0A",               $ for padding only
		0X32, 8, 1,                                        $ 
		"", "", "",                                        $ 
		0, 0, 0,                                  
		1, 1, 1, 0,                               
		0, 0, 0, 0,
		0;

  	Param260 = 0, 6, "20 66 24 01 30 AA",
		0X04, 2, 2,
		"Pr160-User Group Read Seln", "", "",
		0, 11, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param261 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                       $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param262 = 0, 6, "20 66 24 01 30 AC",
		0X04, 2, 2,
		"Pr162-Auto Restart After IPF Seln", "", "",
		0, 2, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param263 = 0, 6, "20 66 24 01 30 AD",
		0X04, 2, 2,
		"Pr163-1st Cushn t For Restart", "s", "",
		0, 200, 0,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param264 = 0, 6, "20 66 24 01 30 AE",
		0X04, 2, 2,
		"Pr164-1st Cushn V For Restart", "%", "",
		0, 1000, 0,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param265 = 0, 6, "20 66 24 01 30 AF",
		0X04, 2, 2,
		"Pr165-Restart Stall Preventn Op Level", "%", "",
		0, 2000, 1500,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param266 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param267 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param268 = 0, 6, "20 29 24 01 30 0A",			   $ 
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param269 = 0, 6, "20 29 24 01 30 0A",			   $ 
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param270 = 0, 6, "20 66 24 01 30 B4",
		0X04, 2, 2,
		"Pr170-Watt-Hr Meter Clr", "", "",
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param271 = 0, 6, "20 66 24 01 30 B5",
		0X04, 2, 2,
		"Pr171-Actual Op Hr Meter Clr", "", "",
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param272 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param273 = 0, 6, "20 66 24 01 30 B7",
		0X04, 2, 2,
		"Pr173-User Group 1 Registratn", "", "",
		0, 999, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param274 = 0, 6, "20 66 24 01 30 B8",
		0X04, 2, 2,
		"Pr174-User Group 1 Deletn", "", "",
		0, 65535, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param275 = 0, 6, "20 66 24 01 30 B9",
		0X04, 2, 2,
		"Pr175-User Group 2 Registratn", "", "",
		0, 999, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param276 = 0, 6, "20 66 24 01 30 BA",
		0X04, 2, 2,
		"Pr176-User Group 2 Deletn", "", "",
		0, 65535, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param277 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param278 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param279 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param280 = 0, 6, "20 66 24 01 30 BE",
		0X04, 2, 2,
		"Pr180-RL Termnl Func Seln", "", "",
		0, 65535, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param281 = 0, 6, "20 66 24 01 30 BF",
		0X04, 2, 2,
		"Pr181-RM Termnl Func Seln", "", "",
		0, 65535, 1,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param282 = 0, 6, "20 66 24 01 30 C0",
		0X04, 2, 2,
		"Pr182-RH Termnl Func Seln", "", "",
		0, 65535, 2,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param283 = 0, 6, "20 66 24 01 30 C1",
		0X04, 2, 2,
		"Pr183-RT Termnl Func Seln", "", "",
		0, 65535, 3,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param284 = 0, 6, "20 66 24 01 30 C2",
		0X04, 2, 2,
		"Pr184-AU Termnl Func Seln", "", "",
		0, 65535, 4,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param285 = 0, 6, "20 66 24 01 30 C3",
		0X04, 2, 2,
		"Pr185-JOG Termnl Func Seln", "", "",
		0, 65535, 5,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param286 = 0, 6, "20 66 24 01 30 C4",
		0X04, 2, 2,
		"Pr186-CS Termnl Func Seln", "", "",
		0, 65535, 6,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param287 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param288 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param289 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param290 = 0, 6, "20 66 24 01 30 C8",
		0X04, 2, 2,
		"Pr190-RUN Termnl Func Seln", "", "",
		0, 65535, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param291 = 0, 6, "20 66 24 01 30 C9",
		0X04, 2, 2,
		"Pr191-SU Termnl Func Seln", "", "",
		0, 65535, 1,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param292 = 0, 6, "20 66 24 01 30 CA",
		0X04, 2, 2,
		"Pr192-IPF Termnl Func Seln", "", "",
		0, 65535, 2,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param293 = 0, 6, "20 66 24 01 30 CB",
		0X04, 2, 2,
		"Pr193-OL Termnl Func Seln", "", "",
		0, 65535, 3,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param294 = 0, 6, "20 66 24 01 30 CC",
		0X04, 2, 2,
		"Pr194-FU Termnl Func Seln", "", "",
		0, 65535, 4,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param295 = 0, 6, "20 66 24 01 30 CD",
		0X04, 2, 2,
		"Pr195-ABC Termnl Func Seln", "", "",
		0, 65535, 99,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param296 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param297 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param298 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param299 = 0, 6, "20 66 24 01 30 D1",
		0X04, 2, 2,
		"Pr199-User's Initial Val Sett", "", "",
		0, 65535, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param300 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param301 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param302 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param303 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param304 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param305 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param306 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param307 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param308 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param309 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param310 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param311 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param312 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param313 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param314 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param315 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param316 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param317 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param318 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param319 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param320 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param321 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param322 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param323 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param324 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param325 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param326 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param327 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param328 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param329 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param330 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param331 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;
  
$class 0x66  A500_66
    Param332 = 0, 6, "20 66 24 01 30 D4",
		0X04, 2, 2,
	    "Pr232-Multi-Spd Sett (Spd 8)", "Hz", "",
		0, 65535, 65535,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param333 = 0, 6, "20 66 24 01 30 D5",
		0X04, 2, 2,
		"Pr233-Mutli-Spd Sett (Spd 9)", "Hz", "",
		0, 65535, 65535,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param334 = 0, 6, "20 66 24 01 30 D6",
		0X04, 2, 2,
		"Pr234-Multi-Spd Sett (Spd 10)", "Hz", "",
		0, 65535, 65535,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param335 = 0, 6, "20 66 24 01 30 D7",
		0X04, 2, 2,
		"Pr235-Mutli-Spd Sett (Spd 11)", "Hz", "",
		0, 65535, 65535,
		10, 1000, 1, 0,
		0, 0, 0, 0,
 		2;

	Param336 = 0, 6, "20 66 24 01 30 D8",
		0X04, 2, 2,
		"Pr236-Multi-Spd Sett (Spd 12)", "Hz", "",
		0, 65535, 65535,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param337 = 0, 6, "20 66 24 01 30 D9",
		0X04, 2, 2,
		"Pr237-Multi-Spd Sett (Spd 13)", "Hz", "",
		0, 65535, 65535,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param338 = 0, 6, "20 66 24 01 30 DA",
		0X04, 2, 2,
		"Pr238-Multi-Spd Sett (Spd 14)", "Hz", "",
		0, 65535, 65535,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param339 = 0, 6, "20 66 24 01 30 DB",
		0X04, 2, 2,
		"Pr239-Multi-Spd Sett (Spd 15)", "Hz", "",
		0, 65535, 65535,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param340 = 0, 6, "20 66 24 01 30 DC",
		0X04, 2, 2,
		"Pr240-Soft-PWM Sett", "", "",				   $Prerex: Pr72=2
		0, 1, 1,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param341 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param342 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param343 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param344 = 0, 6, "20 66 24 01 30 E0",
		0X04, 2, 2,
		"Pr244-Coolg Fan Op Seln", "", "",
		0, 1, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param345 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param346 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param347 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param348 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param349 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param350 = 0, 6, "20 66 24 01 30 E6",
		0X04, 2, 2,
		"Pr250-Stop Seln t", "s", "",
		0, 65535, 65535,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param351 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param352 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param353 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param354 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param355 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param356 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param357 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param358 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param359 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param360 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param361 = 0, 6, "20 66 24 01 30 F1",
		0X04, 2, 2,
		"Pr261-Power Failure Stop Func", "", "",
		0, 1, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param362 = 0, 6, "20 66 24 01 30 F2",
		0X04, 2, 2,
		"Pr262-Subtractd f At Dec Start", "Hz", "",
		0, 2000, 300,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param363 = 0, 6, "20 66 24 01 30 F3",
		0X04, 2, 2,
		"Pr263-Subtractn Startg f", "Hz", "",
		0, 65535, 6000,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param364 = 0, 6, "20 66 24 01 30 F4",
		0X04, 2, 2,
		"Pr264-Power Failure Dec t1", "s", "",
		0, 36000, 50,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param365 = 0, 6, "20 66 24 01 30 F5",
		0X04, 2, 2,
		"Pr265-Power Failure Dec t2", "s", "",
		0, 65535, 65535,
		10, 100, 1, 0,
		0, 0, 0, 0,
		1;

	Param366 = 0, 6, "20 66 24 01 30 F6",
		0X04, 2, 2,
		"Pr266-Power Failure Dec t Swc-Over f", "Hz", "",
		0, 40000, 6000,
		10, 1000, 1, 0,
		0, 0, 0, 0,
		2;

	Param367 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param368 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param369 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;

	Param370 = 0, 6, "20 29 24 01 30 0A",
		0X32, 8, 1,
		"", "", "",                                    $ spare for padding only
		0, 0, 0,
		1, 1, 1, 0,
		0, 0, 0, 0,
		0;



 [EnumPar]
	Param1  = "Type 0", "Type 1", "Type 2", "Type 3", "Type 4",
	          "Type 5", "Type 6", "Type 7";  

	Param8  = "";                                      $ spare for padding only

	Param9  = "";                                      $ spare for padding only
	
	Param10 = "No", "Yes";                             $ Run1

	Param11 = "No", "Yes";                             $ Run2

	Param12 = "Local", "Network";                      $ NetCtrl

	Param13 = "Vendor Specific",					   $ state
		 "Startup",
		 "Not Ready",
		 "Ready",
		 "Enabled",
		 "Stopping",
		 "Fault Stop",
		 "Faulted";

	Param14 = "No", "Yes";                             $ Running1

	Param15 = "No", "Yes";                             $ Running2

	Param16 = "Not Ready", "Ready";                    $ Ready

	Param17 = "Not Faulted", "Faulted";

	Param18 = "";                                      $ spare for padding only

	Param19 = "No Action", "Fault Reset";

	Param20 = "";                                      $ spare for padding only

	Param21 = "";                                      $ spare for padding only

	Param22 = "Local", "Network";                      $ Control from Net

	Param23 = "Fault and Stop ",                       $ DN Fault Mode
		 "Ignore",
		 "Vendor Specific";

	Param24 = "";                                      $ spare for padding only

	Param27 = "";                                      $ spare for padding only

	Param28 = "";                                      $ spare for padding only

	Param29 = "";                                      $ spare for padding only

	Param30 = "Not At Reference", "At Reference";      $ At Reference

	Param31 = "Local", "Network";                      $ Net Reference

	Param32 = "Vendor Specific", 				       $ Drive Mode
		 "Open Loop Speed",
		 "Close Loop Speed",
		 "Torque Control",
		 "Process Control",
		 "Position Control";

	Param36 = "";                                      $ spare for padding only

	Param37 = "";                                      $ spare for padding only

	Param38 = "";                                      $ spare for padding only

	Param39 = "";                                      $ spare for padding only
  
	Param40 = "";                                      $ spare for padding only

	Param42 = "";                                      $ spare for padding only

	Param48 = "";                                      $ spare for padding only
   
	Param59 = "";                                      $ spare for padding only

	Param60 = "";                                      $ spare for padding only

	Param61 = "";                                      $ spare for padding only

	Param62 = "";                                      $ spare for padding only

	Param63 = "";                                      $ spare for padding only

	Param64 = "";                                      $ spare for padding only

	Param65 = "";                                      $ spare for padding only

	Param66 = "";                                      $ spare for padding only

 	Param67 = "";                                      $ spare for padding only

	Param68 = "";                                      $ spare for padding only

	Param70 = "";                                      $ spare for padding only

   	Param72 = "";                                      $ spare for padding only

	Param73 = "";                                      $ 

	Param74 = "";                                      $ 

	Param84 = "";                                      $ special

	Param85 = "";                                      $ special

	Param114 = "0-conveyor, carrier, etc.",	     	   $ Applied Load Selectn
		"1-fan and pump",
		"2-lift (forward boost)",
		"3-lift (reverse boost)",
		"4-applied load according to RT (for. boost)",
		"5-applied load according to RT (rev. boost)";

	Param117 = "0-Normally Open Input",	        	   $ MRS Input Selectn
		"",
		"2-Normally Closed Input";

	Param121 = "0-0 to 3600 sec, 0.1 sec increments",  $ Acc/Dec t Incremt
		"1-0 to 360 sec, 0.01 sec increments";

	Param128 = "0-no compensation",					   $ Multi-Speed Input Compensatn
		"1-compensation available";

	Param129 = "0-linear",		         			   $ Acc/Dec
		"1-S-pattern accel/decel A",
		"2-S-pattern accel/decel B",
		"3-backlash compensation";

	Param130 = "0-No Operation",        			   $ Externl Brake Resistr Selectn
		"1-ABR",
		"2-HC";

	Param138 = "";                                     $ spare for padding only

	Param139 = "";                                     $ spare for padding only

	Param140 = "";                                     $ spare for padding only

    Param151 = "";                                     $ spare for padding only

	Param159 = "0-off",		                		   $ Remote Sett Func Selectn
		"1-on with storage",
		"2-on without storage";

	Param160 = "0-off",		        			   	   $ Intellgnt Mode Selectn
		"1-shortest accel/decel mode, current limit 150%",
		"2-shortest accel/decel mode, current limit 180%",
		"3-optimum accel/decel mode",
		"4-energy-saving mode",
		"5-elevator mode, current limit 150%",
		"6-elevator mode, current limit 180%",
		"7-brake seq mode",
		"8-brake seq mode, no inp";

	Param165 = "0-all",							       $ Retry Selectn
		"1-OC",
		"2-OV",
		"3-OC and OV",
		"4-OC, OV, IPF, UVT, BE, GF, OLT, OPT, PE",
		"5-OC1 and OC3";

	Param175 = "0-reset normal, PU disconn. detect off",  $ Reset Selectn
		"1-reset with protect., PU disconn. detect off",
		"2-reset normal, PU disconn. detect on",
		"3-reset with protect., PU disconn. detect on",
		"4-",
		"5-",
		"6-",
		"7-",
		"8-",
		"9-",
		"10-",
		"11-",
		"12-",
		"13-",
		"14-reset inp normly enabld",
		"15-reset inp enabld if protect func activatd",
		"16-reset inp normly enabld",
		"17-reset inp enabld if protect func activatd";

	Param176 = "0-normal terminal output",		       $ Alarm Code Output Selectn
		"1-alarm code output",
		"2-normal/alarm code output",
		"3-programmed operation output";

	Param177 = "0-parameter write enabled (when stopped)",  $ Pr Write Disable Selectn
		"1-parameter write disabled",
		"2-parameter write enabled (during operation)";

	Param178 = "0-forward and reverse allowed",        $ Reverse Rotation Selection
		"1-reverse disallowed",
		"2-forward disallowed";

	Param179 = "0-normal",		     	    		   $ Operation Mode Selectn
		"1-operation only in PU mode",
		"2-operation only in ext. mode",
		"3-running freq via PU, start/stop via ext.",
		"4-running freq via ext., start/stop via PU",
		"5-programmed operation mode",
		"6-switch-over mode",
		"7-PU operation interlock",
		"8-ext. signal-based op. mode switching";

	Param185 = "";                                     $ spare for padding only

	Param187 = "";                                     $ spare for padding only

	Param195 = "0-no",	                               $ online auto tung sel
		"1-yes";

	Param197 = "";                                     $ spare for padding only

	Param198 = "";                                     $ spare for padding only
 
 	Param199 = "";                                     $ spare for padding only

	Param225 = "";                                     $ spare for padding only

	Param226 = "";                                     $ spare for padding only

	Param227 = "";                                     $ spare for padding only

	Param245 = "0-Japanese",                           $ Language
		"1-English",                                   $ 
		"2-German",
		"3-French",
		"4-Spanish",
		"5-Italian",
		"6-Swedish",
		"7-Finnish";

	Param246 = "";                                     $ spare for padding only

	Param247 = "";                                     $ spare for padding only

	Param259 = "";                                     $ spare for padding only

	Param261 = "";                                     $ spare for padding only

	Param266 = "";                                     $ spare for padding only

	Param267 = "";                                     $ spare for padding only

	Param268 = "";                                     $ spare for padding only

	Param269 = "";                                     $ spare for padding only

	Param272 = "";                                     $ spare for padding only

	Param277 = "";                                     $ spare for padding only

	Param278 = "";                                     $ spare for padding only

	Param279 = "";                                     $ spare for padding only

	Param287 = "";                                     $ spare for padding only

	Param288 = "";                                     $ spare for padding only

	Param289 = "";                                     $ spare for padding only

	Param296 = "";                                     $ spare for padding only

	Param297 = "";                                     $ spare for padding only

	Param298 = "";                                     $ spare for padding only

   	Param300 = "";                                     $ spare for padding only

   	Param301 = "";                                     $ spare for padding only

   	Param302 = "";                                     $ spare for padding only

   	Param303 = "";                                     $ spare for padding only

   	Param304 = "";                                     $ spare for padding only

   	Param305 = "";                                     $ spare for padding only

   	Param306 = "";                                     $ spare for padding only

   	Param307 = "";                                     $ spare for padding only

   	Param308 = "";                                     $ spare for padding only

   	Param309 = "";                                     $ spare for padding only

   	Param310 = "";                                     $ spare for padding only

   	Param311 = "";                                     $ spare for padding only

   	Param312 = "";                                     $ spare for padding only

   	Param313 = "";                                     $ spare for padding only

   	Param314 = "";                                     $ spare for padding only

   	Param315 = "";                                     $ spare for padding only

   	Param316 = "";                                     $ spare for padding only

   	Param317 = "";                                     $ spare for padding only

   	Param318 = "";                                     $ spare for padding only

   	Param319 = "";                                     $ spare for padding only

   	Param320 = "";                                     $ spare for padding only

   	Param321 = "";                                     $ spare for padding only

   	Param322 = "";                                     $ spare for padding only

   	Param323 = "";                                     $ spare for padding only

   	Param324 = "";                                     $ spare for padding only

   	Param325 = "";                                     $ spare for padding only

   	Param326 = "";                                     $ spare for padding only

   	Param327 = "";                                     $ spare for padding only

   	Param328 = "";                                     $ spare for padding only

   	Param329 = "";                                     $ spare for padding only

   	Param330 = "";                                     $ spare for padding only

   	Param331 = "";                                     $ spare for padding only
       
	Param341 = "";                                     $ spare for padding only

	Param342 = "";                                     $ spare for padding only

	Param343 = "";                                     $ spare for padding only

	Param345 = "";                                     $ spare for padding only

	Param346 = "";                                     $ spare for padding only

	Param347 = "";                                     $ spare for padding only

	Param348 = "";                                     $ spare for padding only

	Param349 = "";                                     $ spare for padding only

	Param351 = "";                                     $ spare for padding only

	Param352 = "";                                     $ spare for padding only

	Param353 = "";                                     $ spare for padding only

	Param354 = "";                                     $ spare for padding only

	Param355 = "";                                     $ spare for padding only

	Param356 = "";                                     $ spare for padding only

	Param357 = "";                                     $ spare for padding only

	Param358 = "";                                     $ spare for padding only

	Param359 = "";                                     $ spare for padding only

	Param360 = "";                                     $ spare for padding only

	Param367 = "";                                     $ spare for padding only

	Param368 = "";                                     $ spare for padding only

	Param369 = "";                                     $ spare for padding only

	Param370 = "";                                     $ spare for padding only


[Groups]
	Group1 = "Motor Data",7,
		     1,  2,  3,  4,  5,  6,  7;

	Group2 = "Control Supervisor", 17,
        10, 11, 12, 13, 14, 15, 16, 17, 18, 19,
		20, 21, 22, 23, 24, 25, 26;

	Group3 = "AC Drive", 12, 
        30, 31, 32, 33, 34, 35,
		    41,     43, 44, 45, 46, 47;

    Group4 = "A500 Real Time Monitor II", 9,
	                                        49,
	    50, 51, 52, 53, 54, 55, 56, 57;
			            
	Group5 = "A500 Sys Env Vars", 3,
		                                    69,
            71,             75;

	Group6 = "Alarm History", 8,
				                76, 77, 78, 79,
		80, 81, 82, 83;

	Group7 = "A500 Real Time Monitor I", 14,
		                        86, 87, 88, 89,
		90, 91, 92, 93, 94, 95, 96, 97, 98, 99;

	Group8 = "Basic Funcs", 10,
        100, 101, 102, 103, 104, 105, 106, 107, 108, 109;

	Group9 = "Standard Op Funcs", 28,
        110, 111, 112, 113, 114, 115, 116, 117, 118, 119,
        120, 121, 122, 123, 124, 125, 126, 127, 128, 129,
        130, 131, 132, 133, 134, 135, 136, 137;

	Group10 = "Outp Termnl Funcs", 3,
             141, 142, 143;

	Group11 = "Second Funcs", 7,
                            144, 145, 146, 147, 148, 149, 
        150;

	Group12 = "Display Funcs", 7,
                  152, 153, 154, 155, 156,
                            244, 245;

	Group13 = "Auto Restart Funcs", 2,
                                           157, 158;

	Group14 = "Additional Funcs", 4,
                                                     159,
                                                248, 249,
        260;

	Group15 = "Op Seln Funcs", 20,
        160, 161, 162, 163, 164, 165, 166, 167, 168, 169, 
        170, 171, 172, 173, 174, 175, 176, 177, 178, 179;

	Group16 = "Motor Constans", 13,
        180, 181, 182, 183, 184,                     189,
        190, 191, 192, 193, 194, 195, 196;

	Group17 = "Flex V/F Characteristics", 10,
        200, 201, 202, 203, 204, 205, 206, 207, 208, 209;

	Group18 = "Third Funcs", 7,
        210, 211, 212, 213, 214, 215, 216;

	Group19 = "Communication Funcs", 8,
                                           217, 218, 219, 
        220, 221, 222, 223, 224;

	Group20 = "PID Control", 7,
                                                228, 229,
        230, 231, 232, 233, 234;

	Group21 = "Commercial Power Supply-INV Swc-Over", 5,
                                235, 236, 237, 238, 239;

	Group22 = "Backlash", 4,
        240, 241, 242, 243;

	Group23 = "I Detect", 4,
        250, 251, 252, 253;

	Group24 = "Sub Funcs", 7,
	                        254, 255,      257, 258,
        340,                344,
        350;

	Group25 = "Auto Restart After IPF", 4,
                  262, 263, 264, 265;

	Group26 = "User Funcs", 4,
                       273, 274, 275, 276;

	Group27 = "Termnl Assgnmt Funcs", 16,
        280, 281, 282, 283, 284, 285, 286, 287, 288, 289,
        290, 291, 292, 293, 294, 295;

	Group28 = "Multi-Spd Op", 8,
                  332, 333, 334, 335, 336, 337, 338, 339;

	Group29 = "Power Failure Stop Funcs", 6,
             361, 362, 363, 364, 365, 366;